WATER FILTERS

YOU ARE HERE : HOME | WATER FILTERS | CLACK WATER FILTERS : CLACK FILTER AG+ TURBIDITY FILTER

CLACK® FILTER-AG+® TURBIDITY FILTERs

Clack Organic Scavenger Water Filter

Clack’s Filter AG+ media will filter down to 3 to 5 microns, using a blend of a clinoptilolite natural media with a large surface area and microporous structure. This creates a surface area over 100 times greater than silica sand. The rough surface and internal porosity provide a high surface area for efficient reduction of suspended matter.

The turbidity removal media’s structure typically creates less pressure loss through the filter and allows deeper sediment penetration into the bed for higher sediment loading and longer filter runs. The deep bed filtration capacity of turbidity removal media prevents a rapid build-up of head loss and blinding problems that are associated with typical sand filters.

These are typically installed to remove any solids that may be in suspension within the water. The aim is to trap them between the filter media when the unit is in service. These will then be removed when the flow is reversed during the backwash cycle. They also help protect other treatment equipment as turbidity can blind other filter medias, causing them to lose their effectiveness.

Clack Filter AG+ units are suitable for residential, commercial and industrial applications.

key information

RefDescriptionControl ValveTank Size*Media VolumeFlow Rate
FAGP1-C11.49 m3/hr Filter AG+ WS1 SystemClack WS110” x 54”1.0 ft31.49 m3/hr
FAGP1.5-C12.14 m3/hr Filter AG+ WS1 SystemClack WS112” x 52”1.5 ft32.14 m3/hr
FAGP2-C12.51 m3/hr Filter AG+ WS1 SystemClack WS113” x 54”2.0 ft32.51 m3/hr
FAGP2.5-C12.91 m3/hr Filter AG+ WS1 SystemClack WS114” x 65”2.5 ft32.91 m3/hr
FAGP4-C13.80 m3/hr Filter AG+ WS1 SystemClack WS116” x 65”4.0 ft33.80 m3/hr
FAGP5-C14.81 m3/hr Filter AG+ WS1 SystemClack WS118” x 65”5.0 ft34.81 m3/hr
FAGP7-C1.56.55 m3/hr Filter AG+ WS1.5 SystemClack WS1.521” x 60”7.0 ft36.55 m3/hr
FAGP8-C158.56 m3/hr Filter AG+ WS1.5 SystemClack WS1.524” x 69”8.0 ft38.56 m3/hr
FAGP11-C1513.37 m3/hr Filter AG+ WS1.5 SystemClack WS1.530” x 72”11.0 ft313.37 m3/hr
FAGP20-C219.25 m3/hr Filter AG+ WS2 SystemClack WS236” x 72”20.0 ft319.25 m3/hr
FAGP25-C226.20 m3/hr Filter AG+ WS3 SystemClack WS342” x 78”25.0 ft326.20 m3/hr
FAGP33-C334.22 m3/hr Filter AG+ WS3 SystemClack WS348” x 82”33.0 ft334.22 m3/hr
FAGP49-C340.94 m3/hr Filter AG+ WS3 SystemClack WS355” x 104”49.0 ft340.94 m3/hr

*Filter AG+ 1 Cuft / bag

specification

RefDescriptionWidthDepthHeight
FAGP1-C11.49 m3/hr Filter AG+ WS1 System270 mm400 mm1600 mm
FAGP1.5-C12.14 m3/hr Filter AG+ WS1 System320 mm400 mm1600 mm
FAGP2-C12.51 m3/hr Filter AG+ WS1 System350 mm400 mm1600 mm
FAGP2.5-C12.91 m3/hr Filter AG+ WS1 System370 mm400 mm1900 mm
FAGP4-C13.80 m3/hr Filter AG+ WS1 System410 mm410 mm1900 mm
FAGP5-C1.54.81 m3/hr Filter AG+ WS1 System510 mm510 mm2000 mm
FAGP7-C16.55 m3/hr Filter AG+ WS1.5 System555 mm580 mm2200 mm
FAGP8-C158.56 m3/hr Filter AG+ WS1.5 System610 mm650 mm2200 mm
FAGP11-C1513.37 m3/hr Filter AG+ WS1.5 System610 mm640 mm2200 mm
FAGP20-C219.25 m3/hr Filter AG+ WS2 System770 mm770 mm2400 mm
FAGP25-C226.20 m3/hr Filter AG+ WS3 System950 mm950 mm2500 mm
FAGP33-C334.22 m3/hr Filter AG+ WS3 System1200 mm1200 mm2800 mm
FAGP52-C340.94 m3/hr Filter AG+ WS3 System1300 mm1300 mm2800 mm

optional extras

RefDescription
V3006WS1 Bypass Valve
V3193Clack Spanner for WS1 / WS1.5 / WS2 / WS3
V3070FMNo Hard Water Bypass (NHBP) for WS1 & WS1.25
V3097-BSPTNo Hard Water Bypass (NHBP) for WS1.5
V3098-BSPTNo Hard Water Bypass (NHBP) for WS2
V3099-BSPTNo Hard Water Bypass (NHBP) for WS3
FUNFunnel
V3009Auxiliary microswitch for WS1 / WS1.25 / WS1.5
V3017Auxiliary microswitch for WS2

Please ensure air gap on drain to prevent potential future issues

Soak the media overnight where possible due to the dusty nature of the product

Backwash the unit once the media has been soaked