WATER FILTERS

YOU ARE HERE : HOME | WATER FILTERS | CLACK WATER FILTERS : ORGANIC SCAVENGER FILTERS

CLACK® ORGANIC SCAVENGER UNIT (PEATY WATER)

Clack Organic Scavenger Water Filter

Wateq’s organic scavenger units reduce the discolouration of water by removing organics present in the raw water. Discolouration in water is extremely common in private water supplies, most commonly as iron and manganese. However if the incoming raw water is low in iron and manganese and you are still encountering discoloured water then this is likely a result of elevated organic levels, referred to as tannins. Tannins are a result of water passing though peaty water and decaying vegetation.

Our Organic Scavenger units come complete with two different types of anion selective resins specifically designed to reduce tannins. Please be aware that these units require a larger dose of sodium for regenerations and regeneration is typically based from an onsite assessment of the severity of the water.

These units are always recommended as the final stage of filtration. If you require any advice on sizing and specifying these units, please do not hesitate to get in touch.

key information

RefDescriptionTank SizeResin QuantityFlow Rate* Salt Usage Per Regen
OS25-C10.39 m3/hr WS1 Metered Scavenger10” x 35”25 Litres0.39 m3/hr6.00 kg
OS50-C10.78 m3/hr WS1 Metered Scavenger10” x 54”50 Litres0.78 m3/hr12.0 kg
OS75-C11.17 m3/hr WS1 Metered Scavenger13” x 54”75 Litres1.17 m3/hr18.0 kg
OS100-C11.56 m3/hr WS1 Metered Scavenger14” x 65”100 Litres1.56 m3/hr24.0 kg
OS150-C12.34 m3/hr WS1 Metered Scavenger16” x 65”150 Litres2.34 m3/hr36.0 kg
OS200-C13.12 m3/hr WS1 Metered Scavenger18” x 65”200 Litres3.12 m3/hr48.0 kg
OS250-C13.90 m3/hr WS1 Metered Scavenger21” x 60”250 Litres3.90 m3/hr60.0 kg

* Salt usage based on 240g per litre of resin. This will increase if salt dosage is increased, which may be required

SPECIFICATION

RefInjector ColourBrine Tank Volume* Brine VolumeRegen TimeInlet / Outlet Options
OS30-C1White145 Litres19.2 Litres56 Mins3/4”, 1”, 1.25”
OS50-C1White200 Litres38.4 Litres101 Mins3/4”, 1”, 1.25”
OS75-C1Yellow350 Litres57.6 Litres90 Mins3/4”, 1”, 1.25”
OS100-C1Green350 Litres76.8 Litres111 Mins3/4”, 1”, 1.25”
OS150-C1Orange350 Litres115.2 Litres120 Mins3/4”, 1”, 1.25”
OS200-C1Light Blue500 Litres153.6 Litres127 Mins3/4”, 1”, 1.25”
OS250-C1Light Green750 Litres192 Litres134 Mins3/4”, 1”, 1.25”

* Salt usage based on 240g per litre of resin. This will increase if salt dosage is increased, which may be required.

dimensions

RefDescriptionWidthDepthHeightBrine Tank Diameter øBrine Tank Height
OS30-C10.39 m3/hr WS1 Metered Scavenger650 mm500 mm1100mm500 mm1060 mm
OS50-C10.78 m3/hr WS1 Metered Scavenger820 mm550 mm1590 mm550 mm1160 mm
OS75-C1 1.17 m3/hr WS1 Metered Scavenger1280 mm940 mm1590 mm740mm1275 mm
OS100-C11.56 m3/hr WS1 Metered Scavenger1340 mm960 mm1640 mm740mm1275 mm
OS150-C12.34 m3/hr WS1 Metered Scavenger1390 mm980 mm1640 mm740mm1275 mm
OS200-C13.12 m3/hr WS1 Metered Scavenger1450 mm980 mm2000 mm840 mm1335 mm
OS250-C13.90 m3/hr WS1 Metered Scavenger1720 mm1010 mm2200 mm960 mm1395 mm