clack ws1.5 metered DUPLEX water softeners

• Clack WS1.5 Metered duplex softener, displayed with optional pipework.

WS1.5” duplex water softeners supply treated, softened water at a flow rate up to 10m³/hr. These softeners are used to keep larger RO installations supplied with soft water, suppling manufacturing equipment that uses heat exchangers or where a constant stream of soft water is required for manufacturing. Soft water is supplied twenty-four hours a day, seven days a week. A WS1.5 duplex softener utilises a two vessel & two brass bodied valve system.

The interconnecting pipework seen in the picture is supplied separately. This unit can be purchased complete with the pipework or without.

A duplex water softener will save on salt consumption and be more efficient than a simplex softener. It will also have a larger footprint, so are useful for plant rooms where floor space is not an issue. Our systems are built by our team of senior engineers ensuring the reliability you require and come with a typical resin life expectancy of around 10 to 15 years.

Wateq metered Clack duplex softeners consist of all the required components to allow you to start softening your water straight away.

enquire about this item

WATEQ North : 0161 250 2040

WATEQ South : 020 3744 5934

clack ws1.5 metered KEY INFORMATION

Ref	Description	Tank Size (x2)	Resin Quantity (x2)	Flow Rate	* Capacity @ 300 ppm	** Salt Usage Per Regen
DS125-C15	125 Litre, WS1.5 Metered Duplex Softener	14” x 65”	125 Litres	5.0 m3/hr	20.83 m3	15.0 kg
DS150-C15	150 Litre, WS1.5 Metered Duplex Softener	16” x 65”	150 Litres	6.0 m3/hr	25.00 m3	18.0 kg
DS200-C15	200 Litre, WS1.5 Metered Duplex Softener	18” x 65”	200 Litres	8.0 m3/hr	33.33 m3	24.0 kg
DS250-C15	250 Litre, WS1.5 Metered Duplex Softener	21” x 60”	250 Litres	10.0 m3/hr	41.66 m3	30.0 kg

* Capacity based on 50g CaCO3 hardness removed per litre of resin.
** Salt usage based on 120g per litre of resin. This will increase if salt dosage is increased.

clack ws1.5 metered SPECIFICATION

Ref	Injector Colour	Brine Tank Volume	* Brine Volume	Regen Time	Inlet / Outlet Options
DS125-C15	White 15D	145 Litres	48 Litres	82 Mins	1.5”
DS150-C15	Blue 15E	200 Litres	57.6 Litres	85 Mins	1.5”
DS200-C15	Yellow 15F	350 Litres	76.8 Litres	97 Mins	1.5”
DS250-C15	Green 15H	500 Litres	96 Litres	95 Mins	1.5”

* Brine volume based on a suggested 3.2 litres per kg of salt.

clack ws1.5 metered dimensions

Ref	Description	Width	Depth	Height	Brine Tank Diameter ø	Brine Tank Height
DS125-C15	125 Litre, WS1.5 Metered Duplex Softener	1700 mm	900 mm	1900 mm	500 mm	1060 mm
DS150-C15	150 Litre, WS1.5 Metered Duplex Softener	1750 mm	900 mm	1900 mm	550 mm	1160 mm
DS200-C15	200 Litre, WS1.5 Metered Duplex Softener	1900 mm	900 mm	1900 mm	740 mm	1275 mm
DS250-C15	250 Litre, WS1.5 Metered Duplex Softener	2200 mm	1100 mm	2000 mm	840 mm	1335 mm

clack ws1.5 metered specification

CLACK® WS1.5 SPECIFICATION

Maximum Flow Rate: 13.62 m3/hr

Includes A Built In Motorised Alternating Valve (MAV)

Drain Connections: 3/4”or 1” *

Brine Line Connection: 3/4”

Riser Tube: 50mm ø

Brass Body

Electrical Rating: 230-12V / 50Hz

Power Rating: 0.5 Amps

Min Inlet Pressure: 20psi -1.4 bar

Max Inlet Pressure: 125psi - 8.6 bar

Average Pressure Loss Over System: 1 bar

Min/Max Temperature: 4℃ - 43℃

* Depends on what size DLFC is required.

clack ws1.5 metered optional extras

Ref	Description
SERC15	WS1.25 & WS1.5 Service Kit inc. Spacer Stack, Downflow Piston & Brine Piston
V3193	Clack Spanner
FUN	Funnel
V3009	Auxilary microswitch
SALT	25kg Tablet Salt
RESCLEAN	Resin Clean

Reduce operating costs by up to 60% by adding the Softcontrol Clack water hardness monitor. Designed specifically for Clack Duplex water softeners.

Click Here for further details.

Recommended 20µ pre-filter directly before the softener

Please ensure air gap on drain to prevent potential future issues

Food grade, WRAS certified strong cation exchange resin provided