DUPLEX SOFTENERS

YOU ARE HERE : HOME : WATER SOFTENERS | CLACK DUPLEX WATER SOFTENERS : CLACK WS2

clack ws2 metered DUPLEX water softeners

Clack WS2 Duplex Water Softener

• Clack WS2 Metered duplex softener, displayed with optional pipework.

WS2 duplex softeners are large scale commercial and industrial units capable of supplying soft water at large flow rates. The softeners can supply flows from 10m3/hr to 26m3/hr. Applications that would need soft water at this rate would be large chicken farms and irrigation systems, where soft water is required twenty-four hours a day, seven days a week.

The brass bodied valves sit on a dual tank system, utilising a motorised alternating valve to distribute water and ensure that no hard water will never pass to service during a regeneration. WS2 Clack water softener units are suitable for large commercial and industrial applications.

The interconnecting pipework seen in the picture is supplied separately. The unit can be purchased with or without pipework.

Meter controlled systems are more technically advanced as they calculate the amount of soft water that has been processed and initiate a regeneration process when the online vessel has exhausted its capacity. This ensures that the full resin capacity is used resulting in a saving on salt consumption, water usage and energy.

Wateq metered Clack duplex softeners consist of all the required components to allow you to start softening your water straight away.

enquire about this item

WATEQ North : 0161 250 2040

WATEQ South : 020 3744 5934

    clack ws2 metered KEY INFORMATION

    RefDescriptionTank Size (x2)Resin Quantity (x2)Flow Rate* Capacity @ 300 ppm** Salt Usage Per Regen
    DS250-C2250 Litre, WS2 Metered Duplex Softener21” x 60”250 Litres10.0m3/hr41.66 m330.0 kg
    DS350-C2350 Litre, WS2 Metered Duplex Softener24” x 69”350 Litres14.0 m3/hr58.33 m342.0 kg
    DS500-C2500 Litre, WS2 Metered Duplex Softener30” x 72”500 Litres20.0 m3/hr83.33 m360.0 kg
    DS700-C2700 Litre, WS2 Metered Duplex Softener36” x 72”700 Litres26.0 m3/hr116.66 m384.0 kg

    * Capacity based on 50g CaCO3 hardness removed per litre of resin.
    ** Salt usage based on 120g per litre of resin. This will increase if salt dosage is increased.

    clack ws2 metered SPECIFICATION

    RefInjector ColourBrine Tank Volume* Brine VolumeRegen TimeInlet / Outlet Options
    DS250-C2V3010-2B500 Litres96.0 Litres72 Mins2”
    DS350-C2V3010-2C750 Litres134.4 Litres77 Mins2”
    DS500-C2V3010-2D750 Litres192.0 Litres92 Mins2”
    DS700-C2V3010-2E1000 Litres268.8 Litres83 Mins2”

    * Brine volume based on a suggested 3.2 litres per kg of salt.

    clack ws2 metered dimensions

    RefDescriptionWidthDepthHeightBrine Tank Diameter øBrine Tank Height
    DS250-C2250 Litre, WS2 Metered Duplex Softener2200 mm1050 mm2000 mm840 mm1335 mm
    DS350-C2350 Litre, WS2 Metered Duplex Softener2300 mm1050 mm2200 mm960 mm1395 mm
    DS500-C2500 Litre, WS2 Metered Duplex Softener2700 mm1100 mm2400 mm960 mm1395 mm
    DS700-C2700 Litre, WS2 Metered Duplex Softener3000 mm1100 mm2500 mm1080 mm1460 mm

    clack ws2 metered specification

    CLACK® WS1.5 SPECIFICATION
    Maximum Service Flow Rate: 26m3/hr
    Includes A Motorised Alternating Valve (MAV)
    Drain Connections: 1.5”
    Brine Line Connection: 3/4”
    Riser Tube: 50mm ø
    Brass Body
    Electrical Rating: 230-12V / 50Hz
    Power Rating: 0.5 Amps
    Min Inlet Pressure: 20psi -1.4 bar
    Max Inlet Pressure: 125psi - 8.6 bar
    Average Pressure Loss Over System: 1 bar
    Min/Max Temperature: 4℃ - 43℃

    clack ws2 metered optional extras

    RefDescription
    SERC2WS2 Service Kit inc. Spacer Stack, Downflow Piston & Brine Piston
    V3193Clack Spanner
    FUNFunnel
    V3009Auxilary microswitch
    SALT25kg Tablet Salt
    RESCLEANResin Clean
    WS2PWOptional pipework for Clack WS2
    Clack Softcontrol

    Reduce operating costs by up to 60% by adding the Softcontrol Clack water hardness monitor. Designed specifically for Clack Duplex water softeners.

    Click Here for further details.

    Save Money

    Recommended 20µ pre-filter directly before the softener

    Please ensure air gap on drain to prevent potential future issues

    Food grade, WRAS certified strong cation exchange resin provided