clack ws2 metered simplex water softeners

Clack WS2 Simplex Water Softener

A Clack WS2 simplex softener is ideal for larger commercial and small to medium industrial applications like manufacturing plants that have downtime overnight. The system will use a single vessel with premium softener resin to give a large volume capacity of soft water over the course of the day. Peak flow rates on these units are between 10m3/hr and 26m3/hr.

These simplex units will usually be sized to regenerate every 1-2 days and take up considerably less room than a duplex unit, so are perfect for smaller plant rooms.

The Clack WS2 meter controlled systems are more technically advanced as they calculate the amount of soft water that has been processed and determine when to initiate a regeneration process according to Wateq’s pre-calculated settings.

We can tailor the regeneration process so that this can occur during low periods of water usage, this ensures that there is never an interruption to the supply of water. These systems are ideal for situations that do not require soft water 24/7.

WS2 simplex systems have a large footprint, so may not always be the best option. Alternatively you can use a smaller duplex softener if you require a lower flow rate, but constant capacity and soft water. Please see our duplex systems for more options.

enquire about this item

WATEQ North : 0161 250 2040

WATEQ South : 020 3744 5934

    clack ws2 KEY INFORMATION

    RefDescriptionTank SizeResin QuantityFlow Rate* Capacity @ 300 ppm** Salt Usage Per Regen
    SS250-C2250 Litre, WS2 Metered Softener21” x 60”250 Litres10.0 m3/hr41.66 m330.0 kg
    SS350-C2350 Litre, WS2 Metered Softener24” x 69”350 Litres14.0 m3/hr58.33 m342.0 kg
    SS500-C2500 Litre, WS2 Metered Softener30” x 72”500 Litres20.0 m3/hr83.33 m360.0 kg
    SS700-C2700 Litre, WS2 Metered Softener36” x 72”700 Litres26.0 m3/hr116.66 m384.0 kg

    * Capacity based on 50g CaCO3 hardness removed per litre of resin.
    ** Salt usage based on 120g per litre of resin. This will increase if salt dosage is increased.

    clack ws2 SPECIFICATION

    RefInjector ColourBrine Tank Volume* Brine VolumeRegen TimeInlet / Outlet Options
    SS250-C2V3010-2B500 Litres96.0 Litres72 Mins2”
    SS350-C2V3010-2C750 Litres134.4 Litres77 Mins2”
    SS500-C2V3010-2D750 Litres192.0 Litres92 Mins2”
    SS700-C2V3010-2E1000 Litres268.8 Litres83 Mins2”

    * Brine volume based on a suggested 3.2 litres per kg of salt.

    clack ws2 dimensions

    RefDescriptionWidthDepthHeightBrine Tank Diameter øBrine Tank Height
    SS250-C2250 Litre, WS2 Metered Softener1500 mm900 mm2000 mm840 mm1335 mm
    SS350-C2350 Litre, WS2 Metered Softener1500 mm890 mm2200 mm960 mm1395 mm
    SS500-C2500 Litre, WS2 Metered Softener1840 mm1050 mm2400 mm960 mm1395 mm
    SS700-C2700 Litre, WS2 Metered Softener2000 mm1050 mm2500 mm1080 mm1460 mm

    clack ws2 specification

    Maximum Service Flow Rate: 26m3/hr
    Drain Connections: 1.5”
    Brine Line Connection: 3/4”
    Riser Tube: 50mm ø
    Brass Body
    Electrical Rating: 230-12V / 50Hz
    Power Rating: 0.5 Amps
    Min Inlet Pressure: 20psi -1.4 bar
    Max Inlet Pressure: 125psi - 8.6 bar
    Average Pressure Loss Over System: 1 bar
    Min/Max Temperature: 4℃ - 43℃

    clack ws2 optional extras

    SERC2WS2 Service Kit inc. Spacer Stack, Downflow Piston & Brine Piston
    V3006Bypass Valve
    V3193Clack Spanner
    V3070FMNo Hard Water Bypass (NHBP)
    V3009Auxilary microswitch
    SALT25kg Tablet Salt
    RESCLEANResin Clean

    Recommended 20µ pre-filter directly before the softener

    Please ensure there is an air gap on the drain to prevent potential issues

    Food grade, WRAS certified strong cation exchange resin provided