WATER SOFTENERS

YOU ARE HERE : HOME : WATER SOFTENERS | CLACK SIMPLEX WATER SOFTENERS : CLACK WS1 CI

clack ws1 metered simplex water softeners

Clack WS1 CI Simplex Water Softener

A Clack WS1 simplex water softener is best suited to applications where soft water is not required at a particularly large volume and also not required 24 hours a day. The system utilises a single high-quality vessel and superior grade softening resin. Untreated hard water will pass to service when the system goes into a regeneration cycle. The down time when residents are asleep is the perfect time to regenerate the softener. Although used more often in domestic applications, the WS1 valve is also more than suitable for commercial and industrial applications if a flow rate of under 6m3/hr is required.

All Wateq WS1 simplex softeners come as meter-controlled systems. Meter controlled systems are more technically advanced as they calculate the amount of soft water that has been processed and determine when to initiate a regeneration process according to Wateq’s pre-calculated settings.

We can tailor the regeneration process so that this can occur during low periods of water usage, this ensures that there is never an interruption to the supply of water to your home or business.

Our systems are built by our team of senior engineers providing the reliability you require and have a typical resin life expectancy of around 10 to 15 years.

KEY INFORMATION

RefDescriptionTank Size Resin QuantityFlow Rate* Capacity @ 300 ppm** Salt Usage Per Regen
SS20-C1 20 Litre,WS1 Metered Softener8” x 35”20 Litres0.8 m3/hr3.33 m32.4 kg
SS30-C1 30 Litre,WS1 Metered Softener10” x 35”30 Litres1.2 m3/hr5.00 m33.6 kg
SS40-C1 40 Litre,WS1 Metered Softener10” x 44”40 Litres1.6 m3/hr6.66 m34.8 kg
SS50-C1 50 Litre,WS1 Metered Softener10” x 54”50 Litres2.0 m3/hr8.33 m36.0 kg
SS60-C1 60 Litre,WS1 Metered Softener12” x 52”60 Litres2.4 m3/hr10.00 m37.2 kg
SS75-C175 Litre,WS1 Metered Softener13” x 54”75 Litres3.0 m3/hr12.50 m39.0 kg
SS100-C1100 Litre,WS1 Metered Softener14” x 65”100 Litres4.0 m3/hr16.66 m312.0 kg
SS150-C1150 Litre,WS1 Metered Softener16” x 65”150 Litres6.0 m3/hr25.00 m318 kg

* Capacity based on 50g CaCO3 hardness removed per litre of resin.
** Salt usage based on 120g per litre of resin. This will increase if salt dosage is increased.

SPECIFICATION

RefInjector ColourBrine Tank VolumeRegen TimeInlet / Outlet Options
SS20-C1Violet100 Litres71 Mins3/4”, 1”, 1.25”
SS30-C1White100 Litres71 Mins3/4”, 1”, 1.25”
SS40-C1White100 Litres71 Mins3/4”, 1”, 1.25”
SS50-C1White100 Litres81 Mins3/4”, 1”, 1.25”
SS60-C1Blue100 Litres73 Mins3/4”, 1”, 1.25”
SS75-C1Yellow145 Litres95 Mins3/4”, 1”, 1.25”
SS100-C1Green145 Litres97 Mins3/4”, 1”, 1.25”
SS150-C1Orange200 Litres85 Mins3/4”, 1”, 1.25”

* Brine volume based on a suggested 3.2 litres per kg of salt.

dimensions

RefDescriptionWidthDepthHeightBrine Tank Diameter øBrine Tank Height
SS20-C120 Litre,WS1 Metered Softener550 mm450 mm1100 mm450 mm940 mm
SS30-C130 Litre,WS1 Metered Softener600 mm450 mm1100 mm450 mm940 mm
SS40-C140 Litre,WS1 Metered Softener720 mm450 mm1330 mm450 mm940 mm
SS50-C150 Litre,WS1 Metered Softener720 mm450 mm1590 mm450 mm940 mm
SS60-C160 Litre,WS1 Metered Softener770 mm450 mm1540 mm450 mm940 mm
SS75-C175 Litre,WS1 Metered Softener1040 mm700 mm1590 mm500 mm1060 mm
SS100-C1100 Litre,WS1 Metered Softener1090 mm720 mm1640 mm500 mm1060 mm
SS150-C1150 Litre,WS1 Metered Softener1180 mm770 mm1640 mm550 mm1060 mm

specification

CLACK® WS1 SPECIFICATION
Maximum Flow Rate: 6.1 m3/hr
Drain Connections: 3/4” Male BSP
Brine Line Connection 3/8” Push Fit
Riser Tube: 1.05” ø
Noryl Body
Electrical Rating: 230-12V / 50Hz
Power Rating: 0.5 Amps
Min Inlet Pressure: 20psi -1.4 bar
Max Inlet Pressure: 125psi - 8.6 bar
Average Pressure Loss Over System: 1 bar
Min/Max Temperature: 4℃ - 43℃

optional extras

RefDescription
SERC1WS1 Service Kit inc. Spacer Stack, Downflow Piston & Brine Piston
V3006Bypass Valve
V3193Clack Spanner
V3070FMNo Hard Water Bypass (NHBP)
FunFunnel
V3009Auxilary microswitch
SALT25kg Tablet Salt
RESCLEANResin Clean

Recommended 20µ pre-filter directly before the softener

Please ensure there is an air gap on the drain to prevent potential issues

Food grade, WRAS certified strong cation exchange resin provided