CLACK VALVES

clack WS2 CI SOFTENER / filter VALVE

Clack WS2 CI Softener / Filter Valve

CLACK WS2 CI WATER SOFTENER/ FILTER VALVE

2” Top mount control valve suited for commercial/industrial applications
Epoxy coated lead free brass valve body*
Economical stainless steel optional meter assembly
Service flow rate of 435 lpm (26.1 m3/h) (115 gpm), backwash 303 lpm (18.2 m3/h) (80 gpm)
Solid state microprocessor with easy access front panel settings
Front panel display for time of day, days until next regeneration, volume remaining and current flow rate
Four methods to initiate the downflow regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
Program in ppm, French degrees, German degrees, or cubic meters
Fully programmable regeneration cycle sequence (maximum 9)
Programmable regeneration cycle times
Days override feature; 1-28 days available
Coin Cell Lithium battery back-up with an 24 hour carry over
Level VI 15-volt output DC power supply provides safe and easy installation
Pre or Post treated water regenerant refill
24 hour clock
Reliable and proven DC drive
Patented one piece expanding seal spacer stack assembly U.S. Patent 6,402,944
Patented linearly reciprocating piston operation U.S. Patent 6,444,127

Clack WS2 CI
RefDescription
V2CIDMX-05WS2 - Softener Valve, Meter Controlled 2” includes UK transformer
V12CIBTZ-05WS2 - Filter Valve, Time Controlled 2” includes UK transformer
CLACK WS2 CI SPECIFICATIONS
Inlet/Outlet (1)2” Female BSPT or NPT
Cyclesup to 9
Valve MaterialLead free brass
Regenerationdownflow
CONTROL VALVE FLOW RATES
Service @ 1 bar/15 psi drop (includes meter)435 lpm (26.1 m3/h) (115 gpm)
Backwash @ 1.7 bar/25 psi drop303 lpm (18.2 m3/h) (80 gpm)
Cv Service29.7
Cv Backwash16.0
OPERATING PRESSURES
Minimum / Maximum1.4 - 8.6 bar (20 psi - 125 psi)
OPERATING TEMPERATURES
Minimum / Maximum4º- 43 ºC (40ºC - 110ºF)
METER
Accuracy± 5%
Flow Rate Range5.7 - 568 lpm (1.5 - 150 gpm)
Volume Range0.02 - 5,700 m3
Totalizer1 - 99,999 m3 (264 - 26,417,000 gallons)
DIMENSIONS & WEIGHT
Distributor Pilot
Valve bodies with 2" Female BSPT Inlet & Outlet50 mm OD
Valve bodies with 2" Female NPT Inlet & Outlet1.90” OD (1.5" NPS)
Drain Line Connection1.5” Female NPT
Brine Line Adapters Included1” Male NPT elbow, 3⁄4” x 1” solvent weld elbow and 1⁄2" OD Poly Tube Compression
Mounting Base4” - 8 UN
Height From Top Of Tank216 mm (8.5”)
Shipping Weight With Meter13 Kg (29 lbs.)
ELECTRICAL SPECIFICATIONS
Supply Voltage200VAC to 240VAC
Supply Frequency50/60 Hz
Output Voltage15VDC
Output Current500 mA
TANK APPLICATIONS
Water Softener12” - 48” diameter
Water Filter (2)12” - 36” diameter
CYCLES OF OPERATION
Choose up to nine regeneration cycles, in any order, with a wide range of available values:
CycleRange of times minutes
Backwash1 - 120 minutes
Rinse1 - 120 minutes
Pause (service)1 - 480 minutes
Brine (co-current)1 - 180 minutes
Refill (softener)0.1 - 99.0 minutes
Refill (filter)0.1 - 99.0 minutes

Options: Backwash Filter, Bypass, Weather Cover
Compatible with the following typical concentration of regenerants or chemicals: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines.

1. See Distributor Pilot 2. Filter tank size calculated @ 407 lpm per m2 of bed area /10 gpm of backwash per square foot of bed area