EWS CONTROLLERS
YOU ARE HERE : HOME | CONTROLLERS | CONDUCTIVITY CONTROLLER CC3020
CONDUCTIVITY CONTROLLER - CC3020
The unit type CC3020 is a controller for full automatic monitoring of the conductivity and eventually starting a regeneration through an external device.
The controller is equipped with a conductivity meter without temperature meter. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.
FEATURES
User Interface
Monochrome LCD display (16×2 characters)
Control through three internal keys
Language : English, French, German and Dutch
Inputs
3x Input for potential free switch
1x Conductivity meter
Conductivity Meter
Automatic range switching
Cell constants from 0,01 – 10,00 cm-1
Range from 0,5 – 100.000 µS/cm depending on used cell
Manual temperature compensation
Capacitive cell
Outputs
3x Relay output (powered)
Memory
Programming will be stored and not be affected by power loss
Enclosure
Suitable for wall mounting, IP65
Outputs
24 VAC input / 24 VAC output
115 VAC input / 115 VAC output
230 VAC input / 230 VAC output
12 VDC input / 12 VDC output
24 VDC input / 24 VDC output
| CC3020 CONDUCTIVITY CONTROLLER | |
| Ref | Description |
| CC3020 | CC3020 + power supply |
| Add power supply to codes as mentioned above : 24 VAC input / 24 VAC output, 115 VAC input / 115 VAC output, 230 VAC input / 230 VAC output, 12 VDC input / 12 VDC output, 24 VDC input / 24 VDC output | |