WATER FILTERS

YOU ARE HERE : HOME | WATER FILTERS | CLACK WATER FILTERS : CLACK IRON & MANGANESE FILTERS

CLACK® PYROLOX® PRO - IRON AND MANGANESE FILTERS

Clack Organic Scavenger Water Filter

Pyrolox® Pro is a washed manganese dioxide for the removal of iron, manganese and arsenic. Pyrolox Pro is a much cleaner manganese dioxide compared to other unprocessed manganese dioxides due to the washing process which results in a reduced volume of fines and turbidity.

Pyrolox® Pro is used as a catalyst to oxidise, precipitate and remove iron and manganese as well as trace contaminants such as arsenic and hydrogen sulphide.

This media operates within a pH range of 6.5 – 9.0 and is preferable to a pre-oxidised feed, this can be via a dedicated aeration vessel or by using a strong oxidant like chlorine.

The trapped particulate is then removed from the media bed during the backwash cycle. Wateq’s Pyrolox® Pro provides savings in installation and commissioning cost due to the washed nature of the product.

Pyrolox® Pro units are suitable for residential, commercial and industrial applications.

For help with specification and design, please contact a member of the Wateq team.

key information

RefDescriptionControl ValveTank Size*Media VolumeFlow Rate
PYP1-C11.52 m3/hr Pyrolox Pro WS1 SystemClack WS110” x 54”1.0 ft31.52 m3/hr
PYP1.5-C12.19 m3/hr Pyrolox Pro WS1 SystemClack WS112” x 52”1.5 ft32.19 m3/hr
PYP2-C12.57 m3/hr Pyrolox Pro WS1 SystemClack WS113” x 54”2.0 ft32.57 m3/hr
PYP3-C12.98 m3/hr Pyrolox Pro WS1 SystemClack WS114” x 65”3.0 ft32.98 m3/hr
PYP4-C13.90 m3/hr Pyrolox Pro WS1 SystemClack WS116” x 65”4.0 ft33.90 m3/hr
PYP5-C1.254.93 m3/hr Pyrolox Pro WS1.25 SystemClack WS1.2518” x 65”5.0 ft34.93 m3/hr
PYP6-C1.56.71 m3/hr Pyrolox Pro WS1.5 SystemClack WS1.521” x 60”6.0 ft36.71 m3/hr
PYP8-C1.58.76 m3/hr Pyrolox Pro WS1.5 SystemClack WS1.524” x 69”8.0 ft38.76 m3/hr
PYP11-C213.69 m3/hr Pyrolox Pro WS2 SystemClack WS230” x 72”11.0 ft313.69 m3/hr
PYP16-C2H19.72 m3/hr Pyrolox Pro WS2H SystemClack WS2H36” x 72”16.0 ft319.72 m3/hr
PYP32-C326.84 m3/hr Pyrolox Pro WS3 SystemClack WS342” x 78”32.0 ft326.84 m3/hr
PYP44-C335.06 m3/hr Pyrolox Pro WS3 SystemClack WS348” x 82”44.0 ft335.06 m3/hr
PYP56-C346.03 m3/hr Pyrolox Pro WS3 SystemClack WS355” x 104”56.0 ft346.03 m3/hr

* Pyrolox Pro 0.5 Cuft / bag

specification

RefDescriptionWidthDepthHeight
PYP1-C11.52 m3/hr Pyrolox Pro WS1 System270 mm400 mm1600 mm
PYP1.5-C12.19 m3/hr Pyrolox Pro WS1 System320 mm400 mm1600 mm
PYP2-C12.57 m3/hr Pyrolox Pro WS1 System350 mm400 mm1600 mm
PYP3-C12.98 m3/hr Pyrolox Pro WS1 System370 mm400 mm1900 mm
PYP4-C13.90 m3/hr Pyrolox Pro WS1 System410 mm410 mm1900 mm
PYP5-C1.254.93 m3/hr Pyrolox Pro WS1.25 System510 mm510 mm2000 mm
PYP6-C1.56.71 m3/hr Pyrolox Pro WS1.5 System555 mm580 mm2200 mm
PYP8-C1.58.76 m3/hr Pyrolox Pro WS1.5 System610 mm650 mm2200 mm
PYP11-C213.69 m3/hr Pyrolox Pro WS2 System610 mm640 mm2200 mm
PYP16-C2H19.72 m3/hr Pyrolox Pro WS2H System770 mm770 mm2400 mm
PYP32-C326.84 m3/hr Pyrolox Pro WS3 System950 mm950 mm2500 mm
PYP44-C335.06 m3/hr Pyrolox Pro WS3 System1200 mm1200 mm2800 mm
PYP56-C346.03 m3/hr Pyrolox Pro WS3 System1300 mm1300 mm2800 mm

* Will be provided with an external DLFC
** Based on a 16 minute backwash followed by an 8 minute rinse

optional extras

RefDescription
V3006WS1 Bypass Valve
V3193Clack Spanner for WS1 / WS1.5 / WS2 / WS3
V3070FMNo Hard Water Bypass (NHBP) for WS1 & WS1.25
V3097-BSPTNo Hard Water Bypass (NHBP) for WS1.5
V3098-BSPTNo Hard Water Bypass (NHBP) for WS2
V3099-BSPTNo Hard Water Bypass (NHBP) for WS3
FUNFunnel
V3009Auxiliary microswitch for WS1 / WS1.25 / WS1.5
V3017Auxiliary microswitch for WS2

Please ensure air gap on drain to prevent potential future issues

Soak the media overnight where possible due to the dusty nature of the product

Backwash the unit once the media has been soaked