WATER FILTERS

YOU ARE HERE : HOME | WATER FILTERS | CLACK WATER FILTERS : JURAPERLE PH CORRECTION FILTERS FILTERS

JURAPERLE PH CORRECTION FILTERS

Clack Organic Scavenger Water Filter

Juraperle is a blend of naturally occurring calcium carbonate and magnesium carbonate. This sacrificial media will dissolve in water over time. When water comes into contact with Juraperle the free CO2 is converted and adds small amounts of calcium and magnesium to raise the pH level. This media will only raise the pH level to a maximum of 7.5 dependent on contact time and incoming water quality.

Juraperle is suited to applications where the incoming feed is already around a pH of 6, other parameters such as iron and manganese need to be taken into consideration.

Juraperle should be topped up every 12 months and sized to last a 12 month period. At Wateq our systems are supplied with a backwashing valve to ensure the media is fresh whilst any suspended particulates that are held during service can be backwashed, as well as preventing channelling.

enquire about this item

WATEQ North : 0161 250 2040

WATEQ South : 020 3744 5934

    JURAPERLE PH CORRECTION key information

    RefDescriptionControl ValveTank Size*Media VolumeFlow Rate
    J50-C10.74 m3/hr Juraperle WS1 SystemClack WS110” x 54”50 kgs0.74 m3/hr
    J75-C11.07 m3/hr Juraperle WS1 SystemClack WS112” x 52”75 kgs1.07 m3/hr
    J100-C11.26 m3/hr Juraperle WS1 SystemClack WS113” x 54”100 kgs1.26 m3/hr
    J125-C11.46 m3/hr Juraperle WS1 SystemClack WS114” x 65”125 kgs1.46 m3/hr
    J150-C11.90 m3/hr Juraperle WS1 SystemClack WS116” x 65”150 kgs1.90 m3/hr
    J225-C12.41 m3/hr Juraperle WS1 SystemClack WS118” x 65”225 kgs2.41 m3/hr
    J250-C13.27 m3/hr Juraperle WS1 SystemClack WS121” x 60”250 kgs3.27 m3/hr
    J400-C1.54.28 m3/hr Juraperle WS1.5 SystemClack WS1.524” x 69”400 kgs4.28 m3/hr
    J650-C26.69 m3/hr Juraperle WS2 SystemClack WS230” x 72”650 kgs6.69 m3/hr
    J925-C29.63 m3/hr Juraperle WS2 SystemClack WS236” x 72”925 kgs9.63 m3/hr

    *Juraperle comes in 25kgs bag with 16.6L per bag
    ** Service flow dependent on CO2 level

    JURAPERLE PH CORRECTION specification

    RefDescriptionWidthDepthHeight
    J50-C10.74 m3/hr Juraperle WS1 System270 mm400 mm1600 mm
    J75-C11.07 m3/hr Juraperle WS1 System320 mm400 mm1600 mm
    J100-C11.26 m3/hr Juraperle WS1 System350 mm400 mm1600 mm
    J125-C11.46 m3/hr Juraperle WS1 System370 mm400 mm1900 mm
    J150-C11.90 m3/hr Juraperle WS1 System410 mm410 mm1900 mm
    J225-C12.41 m3/hr Juraperle WS1 System510 mm510 mm2000 mm
    J250-C13.27 m3/hr Juraperle WS1 System555 mm580 mm2200 mm
    J400-C1.54.28 m3/hr Juraperle WS1.5 System610 mm650 mm2200 mm
    J650-C26.69 m3/hr Juraperle WS2 System610 mm640 mm2200 mm
    J925-C29.63 m3/hr Juraperle WS2 System770 mm770 mm2400 mm

    JURAPERLE PH CORRECTION optional extras

    RefDescription
    V3006WS1 Bypass Valve
    V3193Clack Spanner for WS1 / WS1.5 / WS2 / WS3
    V3070FMNo Hard Water Bypass (NHBP) for WS1 & WS1.25
    V3097-BSPTNo Hard Water Bypass (NHBP) for WS1.5
    V3098-BSPTNo Hard Water Bypass (NHBP) for WS2
    V3099-BSPTNo Hard Water Bypass (NHBP) for WS3
    FUNFunnel
    V3009Auxiliary microswitch for WS1 / WS1.25 / WS1.5
    V3017Auxiliary microswitch for WS2

    Please ensure air gap on drain to prevent potential future issues

    Soak the media overnight where possible due to the dusty nature of the product

    Backwash the unit once the media has been soaked